@article {1394,
	title = {A Systematic Analysis of how Practitioners Articulate Business Models across Disruptive Industries},
	journal = {Technology Innovation Management Review},
	volume = {10},
	year = {2020},
	month = {10/2020},
	pages = {29-42},
	publisher = {Talent First Network},
	chapter = {29},
	address = {Ottawa},
	abstract = {Ongoing debates surround the role of business models in understanding the dynamics related to disruptive innovation. Too little is still known about how practitioners highlight different characteristics of business models across industries confronted with disruptive dynamics. This shortcoming in current debates hampers a better understanding of the context-dependent phenomenon of "disruption", ultimately limiting the development of adequate business strategies for incumbents and entrepreneurs alike. Consequently, we generated a systematic database of communicated business models from 1,095 relevant press releases and company reports published between 1995 and 2019. The business models from the retrieved articles were assigned to their corresponding industry using the Global Industry Categorization Standard (GICS) to allow for diverse categorization. Subsequently, we performed a deductive coding procedure, building on accepted business model component classifications. Our study contributes insights about relevant business model components, drawing on practitioner experiences in the face of disruptive dynamics.},
	keywords = {business model components, business models, content analysis, disruptive innovation, industries, secondary data},
	issn = {1927-0321},
	doi = {http://doi.org/10.22215/timreview/1394},
	url = {timreview.ca/article/1394},
	author = {Alina Marie Herting and Alexander Lennart Schmidt}
}
@article {1120,
	title = {Academic Publishing, Internet Technology, and Disruptive Innovation},
	journal = {Technology Innovation Management Review},
	volume = {7},
	year = {2017},
	month = {11/2017},
	pages = {47-56},
	publisher = {Talent First Network},
	address = {Ottawa},
	abstract = {After 350 years of operation, the academic journal publishing industry is imbalanced and in flux as a result of the impacts of Internet technology, which has led, over the past 20 years, to the rise of open access publishing. The introduction of open access journals, in the opinion of many researchers, is considered to be a case of disruptive innovation that is revolutionizing the industry. This article analyzes the traditional journal publishing system, the recent open access models of journal publishing as an evolving phenomenon, the nature and extent of open access as a disruptive innovation, and the implications for key stakeholders. The major finding is that open access publishing has gained traction because technology has contributed to lower publication costs, easier access to research articles, and speedier publishing processes. However, the threat posed by open access has not significantly impacted traditional publishers because of strategies employed by the major publishers and slow adoption of open access by some researchers.},
	keywords = {academic publishing, disruptive innovation, internet technology and publishing, journal publishing, open access publishing models},
	issn = {1927-0321},
	doi = {http://doi.org/10.22215/timreview/1120},
	url = {http://timreview.ca/article/1120},
	author = {Haven Allahar}
}
@article {942,
	title = {3D Printing and Its Disruptive Impacts on Supply Chains of the Future},
	journal = {Technology Innovation Management Review},
	volume = {5},
	year = {2015},
	month = {11/2015},
	pages = {20-25},
	publisher = {Talent First Network},
	address = {Ottawa},
	abstract = {3D printing technology has emerged as one of the most disruptive innovations to impact the global supply chain and logistics industry. The technology is impacting our personal and professional lives, with some claiming that the technology will revolutionize and replace existing manufacturing technologies, while others argue that the technology merely enhances some aspects of the production process. Whether evolutionary or revolutionary, 3D printing technology is recognized as a striking trend that will significantly impact supply chains. Although the expansion of 3D printing in the private consumer market is an interesting development in its own right, the biggest potential for disruption lies in industrial applications and how 3D printing will influence supply chains of the future. In this article, we examine the areas of the supply chain most likely to be disrupted by 3D printing technology and we identify the key questions that must be answered in a roadmap for future research and practice. While we seek answers to these questions, we suggest that managers should develop a flexible change management strategy to mitigate the effects of disruption to their future supply chains and take advantage of the resulting opportunities. Those that do nothing will be left wanting, because the influence of 3D printing technology on supply chains is expected to grow. },
	keywords = {3D printing, additive manufacturing, disruptive innovation, logistics, supply chain},
	issn = {1927-0321},
	doi = {http://doi.org/10.22215/timreview/942},
	url = {http://timreview.ca/article/942},
	author = {Sebastian Mohr and Omera Khan}
}
@article {855,
	title = {Disruptive Innovation vs Disruptive Technology: The Disruptive Potential of the Value Propositions of 3D Printing Technology Startups},
	journal = {Technology Innovation Management Review},
	volume = {4},
	year = {2014},
	month = {12/2014},
	pages = {27-36},
	publisher = {Talent First Network},
	address = {Ottawa},
	abstract = {This article describes an empirical study focusing on the classification of existing business opportunities in the 3D printing technology sector. The authors address three research questions. First, how do technology startups integrate new 3D printing technologies into specific market offers? Second, which value propositions are most attractive in terms of interest from the public and investors? Third, how does the degree of disruptiveness of value propositions relate to the degree of interest from the public and investors? The most notable finding is the link between the business traction of 3D printing technology startups and the degree of disruptiveness of their value propositions. Thus, the article provides empirical support for the conceptualization of the degree of disruptiveness of the value proposition as a metric for the evaluation of the business potential of new technology startups. },
	keywords = {3D printing technology, additive manufacturing, disruptive innovation, value proposition},
	issn = {1927-0321},
	doi = {http://doi.org/10.22215/timreview/855},
	url = {http://timreview.ca/article/855},
	author = {Finn Hahn and S{\o}ren Jensen and Stoyan Tanev}
}
@article {637,
	title = {Real-Time Mobile Communication of Power Requirements for Electric Vehicles},
	journal = {Technology Innovation Management Review},
	volume = {2},
	year = {2012},
	month = {12/2012},
	pages = {22-27},
	publisher = {Talent First Network},
	address = {Ottawa},
	abstract = {The periodic power requirements of an electric vehicle are difficult to predict because the vehicle{\textquoteright}s location, the amount of charge remaining in its batteries, and the timing of its next charge are not known. For clusters of electric vehicles, the problem is magnified, and there is a risk that the demand will strain and overload a power utility{\textquoteright}s infrastructure. Operational managers are left with reactive management of the infrastructure that may defer or prevent a vehicle charge to balance power demands and safeguard the infrastructure.

In this article, the following key concepts are analyzed to provide background on the problem and to outline the requirements of any solution: i) demand uncertainty and reactive management approaches, ii) electric vehicle power requirements, and iii) demand-management telecommunication capabilities. Then, by abstraction, induction, and creative synthesis, a novel solution to the problem is proposed to provide real-time mobile communication of power requirements. The proposed solution has potential to create new service and business opportunities to managers and entrepreneurs.},
	keywords = {disruptive innovation, electric utilities, electric vehicles, high-power devices, mobile communication, power grids, power requirements, telecommunications},
	issn = {1927-0321},
	doi = {http://doi.org/10.22215/timreview/637},
	url = {http://timreview.ca/article/637},
	author = {Derek Smith}
}
